What is aluminium nitride (AlN)?Aluminum nitride (a covalent-bond compound) is an atomic-crystal belonging to a diamondlike nitride. It is non-toxic and has a white, grayish, or white color. Aluminum nitride formula AlN. Aluminum nitride, which is metal-treated, can replace tantalum oxide and alumina for many electronic instruments. Aluminum nitride may be produced by either reducing aluminum dioxide and carbon, or by nitriding aluminum directly.

Aluminum Nitride Ceramic Properties
The aluminum powder is highly purified, with small particles and high activity. It is used as a raw material to make a ceramic substrate that has excellent thermal conductivity. The aluminum nitride substrate is a large-scale heat sink substrate that has excellent thermal conductivity. It also features a low expansion coefficient, possesses high strength, and can withstand high temperatures and chemicals. Aluminum nitride ceramics have a hardness that is higher than traditional alumina. It's a new material for wear-resistant ceramics.

The aluminum nitride substrate is described below.
China has had a long tradition of developing substrates. Substrates have also been continually improved. Fiber substrates, FR-4 aluminum substrates and even copper substrates are traditional substrates.

The improvement of industrial requirements and the refinement of thermal expansion coefficients and heat dissipation limits, it is necessary to look for alternatives.

A ceramic substrate made of aluminum nitride using LAM (Laser high peed activation metallization), is an ideal choice. This allows the metal to be bonded more tightly to the ceramic. The maximum is 45, Pa. This is the strength of a ceramic larger than one mm thick. The aluminum-nitride substrate is coated with a metal film that has a lower resistance and a higher resistance. It can also be customized in thickness between 1 mm and 1 mm.

Why is the aluminum-nitride ceramic substrate so much more expensive?
Comparing the thermal conductivity with the ceramic substrate of traditional, the aluminum substrate has a value between 1 and 2W/mk. While the thermal conduction of copper itself is up to 383.8 W/mK the thermal conduction of the insulating layers is only around 1.0W/mK. This is much better. 1.8W/mK. The aluminum-nitride ceramic has a greater thermal conductivity. Its data ranges between 170 and 230 W/m.k.

The coefficient of thermal contraction (CTE) is one example. In LED lighting the average thermal conductivity CTE for the substrates is 14-17ppm/C and that of the silicon chips is 6ppm/C. PCBs will expand in extreme temperatures and drastic temperature changes. This can lead to desoldering problems. CTE is 4-5ppm/C for aluminum nitride, which is brighter than the expansion ratio and is closer to it.

Aluminum nitride ceramics substrates do not contain organic materials, copper layers are free from oxide layers, have a long life span, can be used under reducing conditions for long periods of time and are suitable for aerospace equipment.

On the market, aluminum nitride-ceramic substrates are used widely. A low dielectric constant and low frequency loss allows high-frequency circuits to be designed, assembled and manufactured. Line/pitch (L), high-density assemblies, can also be made. /S) Resolution can reach up to 20mm. It is also very convenient to have a small, thin, light, and short device in the current trend.

The ceramic substrates production market is located overseas. Due to the importance of independent research in the past few years and the growing demand for aluminum-nitride substrates on the domestic market, this technology has been given the top priority in recent times by domestic PCB manufacturers. Aluminum nitride is a ceramic substrate that has many advantages.

Tech Co., Ltd., a leading aluminum nitride producer, has over 12 years of experience in the chemical products research and design. Contact us if you need high-quality aluminum nitride. Send an inquiry .

Inquiry us