High Purity Manganese Carbide Mn3C Powder CAS 12121-90-3,99.9%

Manganese carbonide is a stable, manganese-carbonid compound. Mn3C has the chemical formula and the melting point at about 1520degC. Its density is 6.89g/cm3. Particle Size: -325mesh
Purity: 99%

About Manganese Carbide Mn3C Powder:
Manganese carbide It is made from carbon and manganese. Manganese carbide formula What is Mn3C? Manganese carbide melting point It is approximately 1520oC Manganese carbide The density 6.89g/cm3. Manganese carbide burns quickly in oxygen, and is decomposed in water to make manganese hydrogenxide and methane. It can be easily decomposed by acid, easy reaction with fluorine and chlorine, and at high temperatures, decomposes into manganese, carbon, and methane.
The heat of the formation of manganese carbide is ^fHm (298K)=-(15.06+-12.55)kJ/mol. The result of smelting manganese-silicon or high-carbon ferromangannese in an electric furnace or blast furnace is manganese carbide. This means that the heat absorption by the reaction will be less than for reduction to metallic manganese, or manganese silicide. It starts With It is cold. The high-carbon ferromanganese is therefore more carbon.

To receive the most current information, send us an inquiry Manganese carbide Prices Please fill out the form below if you wish to buy Manganese Carbide Powder In bulk.

Manganese Carbide Mn3C powder performance:
Mn3C has the following physical characteristics: Mn3C is a hard crystalline solid, or bright needle crystal. Its relative density is 6.89. Concentrated sulfuric acid or nitric Acid will inactivate it. However, water or dilute acids can decompose the metal to create manganese hydroxyide, hydrogen, and other hydrocarbons. It is easily reacted with fluorine or chlorine, and it burns fast in oxygen.

Technical Parameters of Manganese Carbide, Mn3C Powder
Certificate for Mn3C powder
Purity C P S O Get carbon free Size for Particel
>99% 5.91 0.03 0.03 0.3 0.2 D50=11mm, -325mesh

It is simple. Manganese Carbide Mn3C Powder produced?
The gas-based reduction manganese oxide is a method of making manganese carbide. Once you have mixed manganese dioxide, water, and binder together, the dry block can be placed in an atmosphere with H2, CO, CO, and N2. Then, it is calcined at 1100 1300, which is manganese carbide. Here are the specific steps. The mass percent of -325 mesh size refers to 90% analytically purified manganese dioxide, trimanganese troxide and mixed with 0.5% CMC. Finally, pelletization and drying take place. After drying, the sample is placed in an atmosphere of 10% CMC, 30% H2, 10% CO and 50% N2 with a calcination temperature at 1150degC. The calcination process takes 120 minutes. Next, it is placed in an N2 atmosphere. After cooling down to room temperature the obtained manganese carbide product can be converted into manganese dioxide at 95%.

Applicaciones Manganese Carbide Mn3C Powder:
Manganese carbonide Mn3C powder can be used to make hard coatings, target, weld materials, and spray tools. It is also used in the steelmaking industry, aerospace, and many other areas.
The grain refiner of Cermet and Wolfen carbide, manganese carbonide has the ability to significantly enhance the alloy's characteristics.
Manganese troxide is an important raw material in the manufacture of soft magnetic materials of manganese, zinc ferrite and other electronic materials. This is why it is so widely used.
To prepare transformer oils, you can use manganese carbonide. This is a simple process that can be easily replicated on large scales.
Manganese Carbide, Mn3C powder storage conditions:
Manganese Carbide, Mn3C Powder, should be maintained in a dry, cool, and sealed environment.

Shipping and Packing of Manganese Carbide 3C Powder
You can pack it in two plastic bags with the inside.
Manganese Carbide Mn3C Powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Manganese Carbide Mn3C Powder shipping: Could be sent by sea or air as soon as possible after receipt of payment.

Jatujakguide advanced materials Nano Technology Co. Ltd., (Jatujakguide), is a reliable global chemical material supplier and manufacturer. They have over 12 years of experience in manufacturing super high-quality chemicals, Nanomaterials, such as boride, nitride, graphite, sulfide, 3D printing powders, and others.
Send us an enquiry if you're looking for Manganese Carbide Powder of high quality. ( brad@ihpa.net )

Manganese Carbide Properties

Other Titles trimanganese carbide, trimanganese monocarbide, Mn3C powder
12121-90-3
Compound Formula Mn3C
Molecular Weight 176.82
Appearance Gray Black Powder
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility of H2O N/A
Exact N/A

Manganese Carbide Health & Safety Information

Sign Language Alert
Hazard Statements H228-H319
Hazard Codes F
Risk Codes N/A
Safety statements N/A
Transport Information UN 3089, 4.1/III

Inquiry us

NEXT Carbide powder

Our Latest Products

High Purity Manganese Carbide Mn3C Powder CAS 12121-90-3,99.9%

Manganese carbonide is a stable, manganese-carbonid compound. Mn3C has the chemical formula and the melting point at about 1520degC. Its density is 6.89g/cm3.Particle Size: -325mesh Purity: 99% About Manganese Carbide Mn3C Powder: Manganese car…

High Purity Titanium Carbide TiC Powder CAS 12070-08-5,99%

Titanium Carbide has the chemical formula, TiC and a molecularweight of 59.89. The grey powder can be used for cemented carbide production, as well as being used in an electrode and abrasive lamp.Particle Size: -325mesh Purity: 99% Learn more about…

High Purity Hafnium Carbide HfC Powder CAS 12069-85-1, 99.9%

Hafnium Carbide, an inorganic material that has a high melting points is very resistant to wear and corrosion. It also resists oxidation in extreme temperatures (1100-1100°C).Particle size: -325mesh Purity: 99% About Hafnium Carbide HfC Powder:…

0086-0379-64280201 brad@ihpa.net skype whatsapp