Metal Alloy Titanium Rod For Making 3D Printing Powder

For 3D printing powder manufacturing, it is made of titanium rod and titanium alloy rod.

The Metal Alloy Titanium Rod for Making 3D Printer Powder:
These items are used for: Medical use, aircraft and ship components

Execution Standard:

Ti Titanium Bars And Titanium Alloy Barrs for Powder Production in Additive manufacturing (GB/T38973–2020).

Permissible size deviation:

Bar diameter deviations are allowed to be +-0.1mm

There is a maximum deviation from the bar length allowed of +-5 mm. A small bar length less than the nominal (10100) is acceptable, but it is not greater than 5%.

Each end of the bar should always be cut flat. The cutting angle should not exceed 4mm.
Maximum bending distance of bar is 0.7mm/m

Appearance quality:

Clean the surface of bars. There should not be any oxide scales, cracks or folding. All local imperfections on the surface must be eliminated and cleaned. Maximum depth shall not exceed permissible deviation.
It is permitted for the bar's surface to not exceed half the diameter deviation due to individual small scratches, indentations or other defects.

Transportation & Payments:

Steel Alloy Titanium Rod To Make 3D Printer Powder Properties

Other Titles Titium rod
N/A
Compound Formula Ti
Molecular Weight N/A
Appearance N/A
Melting Point N/A
Solubility In Water N/A
Density N/A
Purity N/A
Size Individualized
Boling Point N/A
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young's Module N/A
Exact Mass N/A
Monoisotopic N/A

Titanium Rod To Make 3D Printing Powder Safety & Health Information

Safety Notice N/A
Hazard Statements N/A
Flashing Point N/A
Hazard Codes N/A
Risk Codes N/A
Safety statements N/A
RTECS # N/A
Transport Information N/A
WGK Germany N/A

Inquiry us

NEXT Metal Alloy

Our Latest Products

Metal Alloy High Purity Titanium Plate Titanium Sheet

This is a titanium sheet made from titanium plates with cold rolling. provides Titanium sheet in different sizes. High Purity Titanium Plate Titanium Steel Sheet: Standard: ASTM B265, ASME SB265, ASTM F67, ASTM F136, AMS 4902, AMS 4911…

Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles

Tungsten is used extensively in quartz glass melting furnaces, sapphire crystal growing furnaces, and rare earth smelting faiences. Its temperature is typically above 2000. About Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles:…

Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets

By sintering tungsten, a target made of tungsten is created. Customers may request different shapes or sizes for tungsten targets. About Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets: Chemistry: Properties: Good resistivity and…

0086-0379-64280201 brad@ihpa.net skype whatsapp