Trending

Hydride Powder

  • 0
  • 0

High Purity Zirconium Hydride ZrH2 Powder CAS 7704-99-6, 99%

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Zirconium hydroide has the chemical formula ZrH2, a density of 5.6g/cm3, and a heat generation rate of -39.7kcal/mol. It is prepared in the same way as titanium hydride. Purity: 99%
Particle Size : 325mesh

Zirconium Hydride (ZrH2) Powder:
The density of the zirconium hydride ZrH2 is 5.6 g/cm3, melting is decomposed to form heat-39.7 Kcal/mol. It is prepared by titanium hydrogenated at temperatures up to 900 degrees Celsius. The molecular number of zirconium is 93.24. The zirconium hydrogen fluid can be dissolved with ethanol or hydrofluoric acids; it has reacted strongly with water, acid and oxidants.
The zirconium hydrogen fluid is a powder that can be stable. Air and water will also remain stable under normal circumstances. It reacts violently when exposed to oxidizing acids and strong acids. It also burns smoothly and can decompose completely at temperatures between 500 and 700 degrees Celsius.
L. Zirconium Hydride shows an alloy formed from zirconium. Hydrogen acts as a hardening element to prevent dislocation of zirconia's atomic lattices. Hydrogen can be used to control the hardness and tensile force of the resulting hydride by varying the hydrogen content and the hydrogen present in the precipitation phase. It is possible to make zirconium hydroide stronger, harder than zirconium by adding hydrogen, but it will have a lower toughness. If you are interested in buying Zirconium hydride ZrH2 as a bulk, please send us an inquiry for the most recent price.

Zirconium Hydride Powder CAS 7704-99-6:

In normal conditions it is a stable powder. It reacts violently to strong acids and oxidants. It is a smooth burning material during ignition. Decomposition begins at 300 deg C when in a vacuum and completes at 500 to 700 deg C.

How are Zirconium Hydride ZrH2 Pulp manufactured?
The metal interacts with hydrogen to produce zirconium Hydrogenide. Zirconium metallic sponge with 99.8% purity was heated up to 400 to 600 degrees C and directly reacted to form zirconium hydrogen fluid. Exothermic is the reaction. This reaction can also occur at room temperatures. To achieve uniform integral hydrogenation, annealing is done at a temperature between 400 and 600 deg C over several hours to weeks. Zirconium hydrogenide, even in an air of high vacuum, is rapidly oxidized at room temperature. Since the formed nano-thin oxygen layer prevents further diffusion of oxygen into the material it is possible to ignore changes caused by oxidation. You can reduce zirconium dioxide at 600 deg C using a stream of hydrogen to obtain zirconium-hydride.

Zirconium Hydride (ZrH2) Powder:
Pure zirconium powder is used in powder metallurgy as a hydrogenation catalyst. It's also used as an absorbent by the vacuum tube industry. In vacuum systems, zirconium helps seal the gap between ceramics and metals.
Zirconium Hydrogenide is used as an industrial ingredient for fireworks and flux. It is also used to seal metal-ceramics, in vacuum tubes, and in nuclear reactors.
ZrH2 has many uses, including powder metallurgy. ZrH2 also acts as a hydrogenation catalyst, reducing agent and vacuum tube in metal foam manufacturing. Another use is as fuel for fireworks.
Zirconium Hydride is a powerful reducing agent. Add it to your mix. When iron alloy is prepared, desulfurization and desoxicide agents are added.
Metal coatings can be made by mixing nitride and carbonized carbonized carbide.
Due to the fact that ceramics are easily infiltrated by metals, zirconium has been used as an adhesive between ceramics and vacuum tubes.
The zirconium hydroide can be used in a variety of ways, including as a neutron reducer, an atomic reactor material, or as a suction agent. It can also serve as a firework.

Store Zirconium Hydride Powder ZrH2 in the following conditions:
Zirconiumhydride ZrH2 is affected by dampness, so it should be packed in vacuum and kept in a dry and cool room. ZrH2 Powder should not be exposed to stress.

Shipping & Packing of Zirconium Hydroide ZrH2:
The packaging depends on the amount of Zirconium Hydroide ZrH2 powder.
Zirconium Hydride ZrH2 Poudre packing: Vacuum packaging, 100g,500g or 1kg/bag; 25kg/barrel.
Zirconium Hydride ZrH2 POWDER shipping: Can be sent out via air, sea or express as quickly as possible after payment receipt.

Zirconium Hydride ZrH2 Powder Properties

Alternative Names Zirconium(II) hydride, Dihydridozirconium, zirconium(2+) dihydride, ZrHx, ZrH, CAS 15457-96-2 (ZrH4), CAS 13940-37-9 (ZrH), zirconium-hydrogen alloy
CAS Number 7704-99-6
Compound Formula ZrH2
Molecular Mass 93.24
Appearance Dark gray to black powder
Melting Point N/A
Solubility N/A
Density 5.56 g/cm3
Purity 99.00%
Particle Size 325mesh
Bolding Point N/A
Specific Heating N/A
Thermal Conduction N/A
Thermal Expander N/A
Young’s Module N/A
Exact Mass 91.920354
Monoisotopic Mash 91.920354

Zirconium Hydroide ZrH2 Particle Health & Safety Information

Safety Advisory Danger
Hazard Statements H228-H315-H319-H335
Flashing point N/A
Hazard Codes The following are some of the most effective ways to increase your chances of success:
Risk Codes 11-36/37/38
Safety Declarations 24/25-43-7/8
RTECS Number ZH8015000
Transport Information UN 1437 4.1/PG 2,
WGK Germany 3

Inquiry us

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity 3D Printing 304 Stainless Steel Powder

Chromium Sulfide Cr2S3 Powder CAS 12018-22-3, 99.99%

Our Latest Products

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Germanium Sulfide (GeS2) is a semiconductor compound with the chemical Formula GeS2. It is easily soluble when heated alkali is used, but not in water.Particle size: 100mesh Purity: 99.99% About Germanium Sulfide (GeS2) Powder: Germanium Sulfide…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have high wear resistance. These products are widely used by the electricity, electronics and energy industries.…

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Tungsten alloy heavy plate has low thermal expansion. It is also known for its high density, radiation resistance, thermal and electrical conductivity, and low thermal expansio. It is used widely in the aerospace and medical industries. About Metal…