Trending

What does superplasticizer for concrete admixture do

Superplasticizer used in concrete refers to the fact that after mixing, it can reduce the water demand of concrete under the condition of maintaining basically the same fluidity, thereby improving the strength and durability of concrete, or under the…

More>>

Why is Polycarboxylate Superplasticizer Modified?

Concrete water reducing agent is one of the technical ways to reduce the cement dosage, improve the utilization rate of industrial waste residue, and realize the durability and high performance of concrete.…

More>>

The formula and production method of water reducer for concrete

The application of various concrete admixtures can not only improve the performance of concrete, but also promote the development of new concrete technologies, promote the application of industrial by-products in cementitious material systems, and al…

More>>

Main Performance of Foam Concrete

Foam concrete has a low density. In practical application, the density grade of ordinary foam concrete is 300 kg/m3~1200kg/m3.…

More>>

Concrete Foaming Agent Supplier

Foam concrete is a highly workable low-density material containing up to 80% air.…

More>>

Influence of Concrete Foaming Agent on Foam Concrete (2)

This article will continue to talk about the influences of concrete foaming agent on foam concrete.…

More>>

Influence of concrete raw materials on the properties of polycarboxylate superplasticizer

Concrete is an indispensable raw material in the construction of construction projects. In the process of preparing concrete, in order to improve the performance of concrete, it is necessary to add water reducing agent after adding water, stone, sand…

More>>

Influence of Cement Foaming Agent on Foam Concrete(1)

The cement foaming agent is the key to the quality of foamed concrete. A good cement foaming agent can be made into high-quality foamed concrete.…

More>>

How is the high strength of concrete achieved?

Concrete is classified as high-strength concrete based on 28-day strength. Until the 1970s, concrete with a strength of more than 40Mpa was classified as high-strength concrete.…

More>>

Analysis of the causes of concrete slump loss

Whether the cement used and the pumping agent are matched and adapted must be obtained through the adaptability test. The optimum amount of the pumping agent should be determined through the adaptability test with the cement cementitious material.…

More>>

Concrete Superplasticizer PCE Powder

Polycarboxylic acid superplasticizers are used as high range superplasticizers in high performance concrete.Water content:3.6%pH:8Total alkali:5.8%Gas content:3.1%…

More>>

What are CLC Concrete Advantages?

Foamed concrete has good physical properties, combining insulation and electrical resistance. It has many benefits that make it one of the best alternatives to building materials.…

More>>

Related news

High Purity 3D Printing Nickel Alloy IN718 Powder

Oil futures tumbled more than $5 a barrel on news that the Biden administration is considering releasing about 1 million barrels a day from the U.S. Strategic Petroleum Reserve (SPR) for several months to cool surging crude prices.Brent crude futures…

More>>

What are Hollow Glass Microspheres Used For?

A hollow glass microsphere is a kind of hollow microsphere with a thin wall, high strength, and smooth surface…

More>>

FORESTALL-LQ-(MH)

To avoid reducing the concentration of vapor in the phase by coordination with odor or neutral, reduce their concentration in vapor phase to achieve the effect. What FORESTALL-LQ(MH) is: It is both cationic (cationic) and non-ionic (non-ionic), ha…

More>>

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity 3D Printing 304 Stainless Steel Powder

Chromium Sulfide Cr2S3 Powder CAS 12018-22-3, 99.99%